TAKAHASHI EM-400 T-2 MOUNT (85# MAX) TSM0400
Item No. 611-10130
Free Shipping (within the 48 contiguous US States only)
Manuf. No. Takahashi TSM0400
Special Order Item
The Takahashi EM-400 Temma II provides three piece construction for easy transport and assembly. It rotates fully 360 degree on its base and correction rates (for autoguiding) are hand controller adjustable.
The Takahashi EM-400 Temma II dual-voltage system operates on either 12 volts (250X sidereal) or 24 volts (500X sidereal). It can be used with "J" wooden tripods, NJP metal tripod, or new EM-400 tripods (sold separately). The Takahashi EM-400 Temma II has a weight capacity is 85 lbs. Controls include a power switch, a RA motor switch (standby), a power LED and a dimmer to adjust the polar finder illumination.
Takahashi EM-400 Temma II Equatorial Mount
The Takahashi EM-400 Temma II mount has been developed to fill the gap between the Tak NJP and EM-500 mount. It has been designed to carry an 85 lb. load. The EM-400 disassembles into three sections: The R.A./Dec assembly, the base assembly, and the counterweight shaft. This reduces the heaviest part to 49 lbs (22.3kgs), which is lighter than the weight of the NJP equatorial head. This makes transportation and set-up easier.
The entire mount rotates 360 degree on it's base for easier set-up, and allows the tripod to be set in the most secure position. All of the cables attach to the underside of the Dec. housing and the use of internal encoders allows the mount to be used without having the cable wrap around in inconvenient positions. The 8kg. counterweights use two lock screws for more secure attachment to the counterweight shaft.
The Takahashi EM400 Temma II Mount uses the highly accurate EM-200 computing reticle with an 11X eyepiece to allow three arc minute polar alignment to the celestial pole. This reticle is useable until the year 2040. The EM 400 is a dual-voltage mount that will operate on either 12 volts (250X sidereal) or 24 volts (500X sidereal). The Temma II system is compatible with The Sky and other popular software using the free ASCOM and Linux drivers. This mount can be used anywhere in the world with a latitude adjustment from 0ý to 50 degree in either hemisphere.
Specifications For Takahashi EM-400 Temma II Mount
- Type German Equatorial Mount
- R.A. slow-motion Motor driven
- DEC. slow-motion Motor driven
- Azimuth adjustment +/- 10 degree with rotary base plate
- Elevation adjustment with ML altitude wedge: 0 degree to 50 degree with HL altitude
- wedge : 15 degree to 55 degree (default version for Europe)
- Polar finder / Accuracy Built-in / 2'
- R.A. setting circles accuracy No setting circles
- DEC. setting circles accuracy No setting circles
- Encoders Included
- Weight Main block : 22.5 kg
- Altitude wedge : 5.2 kg
- Total weight (with counterweight shaft) : 29.5 kg
- Counterweights 2 x 8kg
- Maximal loading capacity 35 kg (without counterweight)
- Optimal loading capacity 20 kg (without counterweight)
- Operating voltage 12V / 24V DC
- Power consumption @12VDC : 0.5/0.7A (NS, sidereal rate and tracking speed) ; 1.6A
- (HS, pointing speed) @24VDC : 0.4/0.9A (NS, sidereal rate and tracking speed) ; 1.4A (HS, pointing speed)
- Standby mode : 0.1A
- Tube mounting Flat base with 4 x M10 et 2 x M8 screws
- Mounting capacities Tube rings, plates and dovetail mounting plates
- R.A. axis diameter (material) 40 mm (steel)
- R.A. worm gear shaft diameter (material) 20 mm (steel)
- R.A. gear diameter (material) 150 mm/180 teeth (bronze)
- DEC. axis diameter (material) 40 mm (steel)
- DEC. worm gear shaft (material) 20 mm (steel)
- DEC. gear diameter (material) 150 mm/180 teeth (bronze)
- Type Temma-2
- Stepper motor accuracy 50 pps
- Slow motion speeds R.A. : 0.1x to 1.9x sidereal rate
- DEC. : ý 1.5' to 13.5' (by increment of 1.5'/sec) High speed mode 12V. : 250x sidereal rate (R.A.), ý 1ý/sec (DEC.) 24V. : 500x sidereal rate (R.A.), ý2ý/sec (DEC.)
- Worm gear shaft cycle 8 minutes
- Tracking accuracy ý 5"
- Autoguiding SBIG compatible (mini-DIN PS2 connector)
- PC connectivity RS-232C serial port (with S-VHS to DB-9 cable)