Howie Glatter 2 inch Flug (2" BLUG FOR FEATHER TOUCH  FOCUSERS) $65.00,  Howie Glatter HGFL,Telescope Accessories Accessories, Web Store
Secure website, verified, safe for online shopping
The World's Largest Selection of Optics for Astronomy, Sport, Science and Education
Shop By Price
Shop By Interests
Gift Certificate

 


HOWIE GLATTER 2 INCH FLUG (2" BLUG FOR FEATHER TOUCH FOCUSERS) HGFL

  Howie Glatter Telescope Accessories Accessories
Tell Friend  

Howie Glatter
Other products by Howie Glatter
Similar items
Howie Glatter 2 inch Flug (2

Enlarge Photo
 
Sale Price: $65.00
Buy  Now!
 

HOWIE GLATTER 2" FLUG (2" BLUG FOR FEATHER TOUCH FOCUSERS)

Item No. 747-21010
Manuf. No. Howie Glatter HGFL

Eligible for Scope City Rewards at Check-out

2"FLUG(2" BLUG FOR FEATHER TOUCH FOCUSERS) The Blug, short for Barlowed collimation plug, is a new collimation accessory used together with a regular laser collimator to perform Barlowed laser primary mirror alignment.

The Blug does not attach to the collimator like a self-Barlow attachment. It is inserted in the inner end of the focuser drawtube, inside the telescope tube or upper cage, and it is retained by an O-ring in the base of the Blug. It has an anti-reflection coated negative lens mounted in an axial hole, and a white 45 degree screen face. Blugs are made in two sizes to fit 1 1/4" and 2" drawtubes.

On a truss tube dob, the 45 degree face of the Blug is easily visible from primary adjustment position. You observe the shadow of the primary mark on the Blug face as you turn the primary adjustment screws to center it.. With a solid tube scope, the Blug can be turned 180 degrees to face the front, and the target shadow seen easily from the front.

The Blug extends 3/8" into the back end of the drawtube, so the laser collimator used with it can not extend past this or it will interfere with the Blug and not allow it to seat properly. A long collimator can often be drawn back in the eyepiece holder and clamped so it will not interfere with the Blug.

I supply a shim kit with the Blug for use if the drawtube inner end is larger than the eyepiece nominal size. The plastic shim strips can be inserted under the o-ring, and in this way drawtubes as much as 1/10" oversize can be accommodated.

The Flug

The current Feathertouch focuser has a 2" filter thread at the inner end of the drawtube, with a large relief diameter past the thread. In order to fit this focuser, it is supplied with an adapter o-ring which fits on the end of the Blug and acts as a "spacer" so that the Feathertouch focuser threads will engage the Blug retention o-ring. However, for those who will be using the Blug primarily with a Feathertouch focuser there is now a Blug that will fit the Feathertouch directly without using an adapter. It is called the Flug (tm). The only difference between the Blug and Flug is that the retention o-ring on the Flug is right up against the Flug shoulder. The Flug will also fit fine in most regular 2" drawtubes.

Blug Procedure

Adjust the secondary mirror angular alignment as usual, to place the laser spot in the center of the collimation target on the primary. If an aperture stop was used in the collimator, remove it for Barlowed collimation because you want as much light as possible through the Barlow lens to produce the highest shadow contrast.. Insert the Blug into the inner end of the drawtube and make sure it seats firmly against the drawtube end so that there is no danger of it falling out. Adjust the primary mirror to center the collimation target shadow on the Blug face. Remove the collimator and Blug and you are done.

The Blug has a patent pending.


Need Help? To Place an Order: Please Shop Online,
Visit Any Scope City Center or Call Us Directly at 1-800-235-3344
 


Scope City 100% Satisfaction Guarantee

Scope City unconditionally guarantees that you will be 100% satisfied with your mail order purchase, or just
return the merchandise in original condition within 15 days for a Full Refund, less shipping and handling charges!